NLGI 2
Multi-Purpose Lithium Grease NLGI 2
General chassis, bearing and pin lubrication across automotive and plant equipment.
DIN KP2K-30
Industrial & Manufacturing
Greases
Grease selection is a bearing-speed and temperature problem. These thickener systems cover general workshop use through to sustained high-temperature and wet-service duty.
4 grades in range
Why this range
Lithium complex, moly EP and high-temperature greases
Bohr Chemical greases cover automotive wheel bearings, marine and wet-service points, and high-temperature plant applications. Thickener type, base oil viscosity and EP additive levels are matched to the bearing speed factor and operating temperature so grease stays in the bearing instead of bleeding out of it.
Mechanical stability
Lithium complex thickeners resist softening under continuous working in loaded bearings.
Water resistance
Marine and wet-service grades hold film integrity through washout.
Extreme pressure
Moly and EP grades carry shock loads on pins, bushes and open gearing.
Typical applications
- Automotive wheel bearings and chassis points
- Marine trailer and boat-launch hubs
- Earthmoving pins, bushes and open gears
- High-temperature plant bearings
Featured grades
Most specified in this range
NLGI 2, 3% MoS₂
Moly EP Grease NLGI 2
Shock-loaded and oscillating joints — excavator pins, universal joints, fifth wheels.
DIN KPF2K-25
NLGI 2
High Temperature Complex Grease
Oven, kiln and wheel-bearing service where conventional soaps drop out.
Continuous to 180 °C
Full range
All greases
NLGI 2
Multi-Purpose Lithium Grease NLGI 2
General chassis, bearing and pin lubrication across automotive and plant equipment.
Specifications
DIN KP2K-30
NLGI 2, 3% MoS₂
Moly EP Grease NLGI 2
Shock-loaded and oscillating joints — excavator pins, universal joints, fifth wheels.
Specifications
DIN KPF2K-25
NLGI 2
High Temperature Complex Grease
Oven, kiln and wheel-bearing service where conventional soaps drop out.
Specifications
Continuous to 180 °C
NLGI 2
Marine & Water Resistant Grease
Trailer bearings, winches and any point that spends its life wet or salty.
Specifications
Excellent water washout resistance
Common questions
Greases FAQ
Can two greases be mixed?
Only when the thickener types are compatible. Mixing incompatible thickeners can soften the grease and cause it to run out of the bearing — purge fully when changing product.
When is a moly grease the right choice?
Use moly EP grease on slow-moving, heavily loaded and oscillating points such as excavator pins, where sliding contact dominates.
Talk to a lubrication engineer, not a call center
Send your equipment list and duty cycle. We will come back with a specification-matched recommendation and the data sheets to support it.